Buy an LED exhibition stand

If you buy an LED trade fair stand, you will no longer be overlooked at any trade fair or event, because the radiant power of a large LED trade fair wall attracts all eyes. An LED exhibition stand is a brilliant and luminous eye-catcher that perfectly presents your advertising message. No matter where you use an LED trade fair stand - your corporate image will be remembered. We offer a wide range of different LED exhibition stands that guarantee that your company and your products are presented optimally and successfully.  The mobile construction of our LED exhibition walls allows many different set-up options. Our modular system technology offers exhibitors the possibility to variably adapt their LED trade fair stand to the respective booked trade fair stand area. By combining LED exhibition walls of different sizes, a new stand impression can be created again and again. Our LED exhibition stands are individually equipped with textile diabes printed from your data. These are assembled all around with a rubber piping system (Silicon Edge Graphic) and then inserted into the system groove of the LED exhibition stands without the need for tools. All our LED illuminated walls can be covered with textile slides on both sides, so that the illuminated walls can also be used as room dividers in a showroom or as impressive eye-catchers in an office area. Even inexperienced exhibitors can easily set up and assemble our LED exhibition stands. LED exhibition stands open up endless new possibilities in the areas of trade fairs, exhibitions and events. Buy LED exhibition stand at MARTINCOLOR. Let our professionals advise you under Tel. 069-756080-0.

 

Selection of LED exhibition stands

PIXLIP GO exhibition stand

The LED stand for "beginners" can be set up in no time at all and is therefore also suitable for inexperienced exhibitors.

  • Plastic profiles
  • Heights: 200, 225, 250 cm
  • Widths: 85, 100, 200 and 300 cm
  • Incl. 2 x graphic prints
  • Pre-assembled LED modules
  • low weight
  • Carrying bag
  • Car-friendly packaging

ALU STAR LED exhibition stand

If you choose our bestseller, your LED exhibition stand is expandable in size.

  • Aluminium
  • Heights: 200, 230, 250 and 300 cm
  • Widths: 100 - 500 cm
  • Incl. 2 x graphic prints
  • Large range of accessories
  • Modular construction
  • Wheeled ABS transport case
  • Transport in car or estate car

GRID LED exhibition stand

The foldable lightbox from the folding display family has 30 cm wide illuminated side panels

  • Scissor grid system
  • Height: 230 cm, D: 30 cm
  • Width: 78 - 300 cm
  • 2 x individual graphic print
  • LED curtains for backlighting
  • Walls can be connected
  • Rollable transport trolley
  • Transport in the car

OCTAlumina LED exhibition stand

These LED light walls can be constructed in any desired size and are also suitable for wall mounting

  • Aluminium
  • Standard height 248 cm
  • Individual widths
  • 2 x graphic prints
  • LED strips in profile
  • Can be combined with Octanorm range
  • Many accessories
  • Transport case made to measure

ALU LightUp LED exhibition stand

The luminous self-assembly exhibition stand for "dummies" with a particularly attractive price-performance ratio

  • Aluminium
  • Heights: 200, 230 and 250 cm
  • Widths: 85, 100 and 200 cm
  • 2 x individual graphic prints
  • LED strips in the profile
  • Removable system feet
  • Transport trolley on wheels
  • Car-friendly packaging

Expand GrandFabric Lightbox

This LED trade fair stand consists of free-standing aluminium frames, with the diabescent fabric "slipped" over the frame.

  • Aluminium frame
  • Heights: 80, 100, 240 cm
  • Widths: 80, 160, 240 and 294 cm
  • 2 x individual graphic prints
  • LED modules in the frame
  • Practical click feet
  • Fixed wall connection possible
  • Transport trolley

System example: PIXLIP GO

PIXLIP GO LED exhibition walls are made of a lightweight ABS plastic material that is very easy to handle. In contrast to aluminium profiles, plastic profiles have no sharp edges and are therefore particularly popular with inexperienced exhibitors. The bright Osram LED modules integrated in the profile guarantee homogeneous illumination and an eye-catching presentation of your advertising message. The individually printed diabes make every PIXLIP GO LED exhibition stand a TOP HINGER. And if new advertising content is to be presented at a trade fair, the foldable slide prints can be easily replaced in no time at all.

If you are more interested in a modular LED trade fair stand made of stable aluminium profiles, download our brochure with all the information on our BESTESELLER ALU STAR LED trade fair system here.

 

Set up & dismantling

PIXLIP GO LED exhibition walls can be set up and taken down in no time. This is due to the easy-to-handle plastic profiles that are simply plugged together to form a frame without the need for tools. The LED modules are already mounted in the white plastic profiles, which is particularly practical. The fully assembled lighting frame is then covered on both sides with a foldable diamond material. The complete PIXLIP GO LED exhibition wall is transported in a carrying bag that fits in any car.

LED counters & accessories

Connect several PIXLIP GO LED walls to create a luminous exhibition stand. Various system connectors are available for this purpose. You can find the PIXLIP GO system connectors in our shop https://www.martincolor.de/shop/. In addition to the PIXLIP LED walls, there are also PIXLIP LED trade fair counters to complete your LED trade fair stand. If desired, the LED counter can also be equipped with a rechargeable battery so that it can be positioned free-standing on your exhibition stand without an external power connection.

Exhibition-Set 3x3 m

 

Exhibition-Sets

Here you can see some LED trade fair stand sets that we have put together individually for our customers. The basis of the LED stand sets is our ALU LightUp system, which is available in widths of 85, 100 and 200 cm. Because it is so easy to use, it is also suitable for trade fair exhibitors who are not so experienced in setting up trade fair systems. The individual LED frames, which are covered with personalised slide prints, can be combined with each other. In this way, depending on how the systems are combined with each other, a new exhibition stand impression is created again and again. With appropriate connectors, bridge modules can also be integrated into the exhibition set, as with the 4x2 m exhibition set. The fair sets are completed with LED counters, brochure stands or foldable showcase columns. 

Exhibition-Set 3x2 m

 

Exhibition-Set 3x3 m

Exhibition-Set 3x2 m

 

Exhibition-Set 3x3 m

Exhibition-Set 3x2 m

Exhibition-Set 4x2 m

 

References

MARTINCOLOR is the expert for individual and impressive LED exhibition stands, which can be set up by the exhibitor independently and without tools. Our main focus is that each of the exhibition stands we offer is modularly expandable and variable in use. Depending on the customer's requirements, LED exhibition stands from different manufacturers are available. Our customer Ocean Pharma, for example, opted for an OCTAlumina exhibition stand because they wanted a spacious and lockable storage area and an LED lighting cube for ceiling suspension. The requirements of our customers Inomed and Cadolto Modulbau GmbH were different. Here, the main requirement was the mobility of the LED exhibition stand and the flexibility of the construction. You can find more customer projects at https://www.martincolor.de/en/martincolor-projects/exhibition-stand-projects.html.

Continental

LED exhibition stand: ALU STAR

ADO Goldkante

LED exhibition stand: ALU LightUp

TH Wildau

LED exhibition stand: PIXLIP GO

NTT DATA GmbH

LED exhibition stand: GRID Lightbox

Fraport AG

LED exhibition stand: PIXLIP GO

Baker McKenzie

LED exhibition stand: OCTAlumina

Ocean Pharma GmbH

LED exhibition stand: OCTAlumina

Neuromedex GmbH

LED exhibition stand: ALU LightUp

EVN AG

LED exhibition stand: ALU STAR

Messkonzept GmbH

LED exhibition stand: ALU LightUp

ZENO GmbH

LED exhibition stand: ALU STAR

DLG e. V.

LED exhibition stand: PIXLIP GO

Shimadzu Europa GmbH

LED exhibition stand: GRID Lightbox

Bickhardt Bau AG

LED exhibition stand: ALU LightUp

OPTIMA packaging group GmbH

LED exhibition stand: ALU STAR

Service

Consulting

Our customers are our focus. We take the time to get to know you and your wishes. We want to present you with the exhibition system solutions that best meet your requirements - because: The product must fit the customer, his needs and goals.

24-hour service

If you are in a hurry, we can produce many products from our range within 24 hours. You can then either collect the finished product from us or we will send it to your desired address overnight.

Logistics

We have extensive storage space to store our customers' trade fair equipment on request. Our qualified team checks the condition of all incoming and outgoing materials, coordinates the complete logistics and loads the trade fair equipment for transport.

Assembly

We are happy to take care of the assembly and dismantling of your LED exhibition stand anywhere in Germany. Our team also assembles photos, graphics, signs, lettering, foils or LED displays on site, e.g. in your office, at your customer's or at an event.

Trade fair planning

MARTINCOLOR is the specialist for individual small exhibition stands up to 80 m². Our aim is to develop a trade fair planning system that enables our customers to install the entire trade fair stand technology themselves. This not only saves costs but also leads to great flexibility.

Graphic design

The effective design of LED trade fair stands & walls, textile coverings, RollUps and other trade fair displays is one of our focal points in graphic design - because a successful presentation is remembered by trade fair visitors.

Contact

Our customers are the focus

We have been the specialist for individual presentation and trade fair solutions in Germany for over 50 years. Our focus is on our customers and how they can present themselves as eye-catching and memorable as possible at trade fairs, exhibitions and events. For this we offer a variety of clever exhibition system solutions. For more than 10 years we have specialized in the field of illuminated advertising. Our LED exhibition stands are particularly popular and open up many opportunities for exhibitors to attract attention at trade fairs and events. We would be happy to advise you on what is possible with LED light walls. Visit our showroom, send us an email or call us on Tel. 069-756080-0.

 

MARTINCOLOR GmbH & Co. KG 

Gaugrafenstraße 24 d
D-60489 Frankfurt
Fon +49 (0) 69 75 60 80-0
Fax +49 (0) 69 75 60 80-88
www.martincolor.de
https://www.martincolor.de/en/exhibition-wall.html 

Your contact persons

Our experts from customer contact take the time to advise you comprehensively and competently. Their goal is to find the exhibition system that best suits your needs and requirements. Call us or visit our showroom.

Sonja Ewald
+49 (0) 69 75 60 80-81
s.ewald@martincolor.de

Eric Zies
+49 (0) 69 75 60 80-85
e.zies@martincolor.de

Silvia Fuentes
+49 (0) 69 75 60 80-11
fuentes@martincolor.de

Katja Weckler
+49 (0) 69 75 60 80-0
info@martincolor.de

Kontakt Formular led-messestand-kaufen EN

Contact form
In our showroom in Frankfurt you can inform yourself about the whole variety of our offer. We will gladly take our time to provide you with the best possible advice. Simply let us know when you would like to make an appointment.

© 2023 Martincolor GmbH & Co. KG | Imprint | Data protection